二、詳細參數：
| 產品型號 MODLE | WDA-D22-SF9 | |
| 電氣參數 Electrical | ||
| 阻值范圍 Resistance Range | 2kΩ / 5kΩ | |
| 阻值誤差 Resistance tolerance | +10% +20% Standard | |
| 殘留阻抗 End Resistance | <0.5% | |
| 阻值變化規律 Resistance taper | B（JIS直線 JIS LINERA） | |
| 線性精度 independent linearity | + 3% | |
| 額定功率 power rating | 0.5W(70℃)0W(120℃) | |
| 接觸電阻變化 peak noise (c.r.v.) | <2%Rn | |
| 耐電壓 dielectric strength | 1000V 1minute | |
| 有效電氣行程 adjustment travel | 240° 340° | |
| 絕緣電阻 insulation resistance | 100MΩ | |
| 分辯率 resolution | infinite | |
| 工作電壓 maximum input voltage | DC30V | |
| 環境參數 environmental | ||
| 存儲溫度 storage temperature range | -60℃ ～+125℃ | |
| 使用溫度 operating temperature range | -60℃ ～+125℃ | |
| 溫度系數 temperature coefficient | 500ppm/℃ | |
| 電氣耐久性 load life | 70℃ 1,000h; △R/R≤±10% | |
| 旋轉壽命 rotational life | 3.000.000次，△R/R≤±7% | |
| IP防護等級 IP range | IP65 | |
| 耐焊接熱 soldering heat resistance | （ 350℃ 3S ) △R/R≤±2% | |
| 熱循環 temperature cycle | （-25℃ +85℃ 30min/each、 5cycles) △R/R≤±10% | |
| 振動 vibration | 10-55Hz, 1.5mm 振幅 amplitude, 3 方向directions △R/R≤±5% | |
| 機械參數 mechanical | ||
| 尺寸 size | 見附圖 See drawing | |
| 機械行程 mechanical travel | 360° | |
| 旋轉力矩 shaft torque | 50-50gf.cm | |
| 止擋力矩 stop strength | _ | |
| 鎖緊力矩 mounting nut torque | 15kgf.cm | |
| 軸跳動 shaft runout | 0.15mm | |
| 軸端間隙 shaft end play | (出軸長度shaft length 30mm) 0.15mm | |
| 徑向間隙 shaft radial play | 0.15mm | |
| 軸的推力 shaft strength (push) | 125N(12.75kgf)min. | |
| 軸的拉力 shaft strength(tensile) | 125N(12.75kgf)min. | |
| 標記 marking | --- | |
| 配件 hardware | --- | |
三、產品尺寸圖：
