40G QSFP+ SR4 100m 850nm MPO Optical Transceiver
QSFP+ 40G SR4 Transceiver module is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP) optical module. It provides increased port density and total system cost savings. The QSFP full -duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate data rate of 40Gbps over 100 meters of OM3 multi-mode fiber.
An optical fiber cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle.
The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. A 2 -wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information.
The RQ-40G-SR4 is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (SFF-8436). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two -wire serial interface.
Absolute Maximum Ratings*Note4
| Parameter | Symbol | Min | Max | Unit |
| StorageTemperature | Tst | -20 | 85 | degC |
| RelativeHumidity (non-condensation) | RH | - | 85 | % |
| Supply Voltage | VCC | -0.5 | 3.6 | V |
| Voltage on LVTTL Input | Vilvttl | -0.5 | VCC+0.5 | V |
| LVTTL Output Current | Lolvttl | - | 15 | mA |
| Voltage on Open Collector Output | Voco | 0 | 6 | V |
Note4: Exceeding any one of these values may destroy the device permanently.
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit |
| Operating Case Temperature | Topc | -5 | - | 70 | C |
| Power Supply Voltage | VCC | 3.1 | - | 3.5 | V |
| Power Supply Current | ICC | - | - | 350 | mA |
| Total Power Consumption (XLPPI) |
| - | - | 1.5 | W |
| Fiber Length:2000 MHz ? km 50μm MMF (OM3) |
| 0.5 |
- | 100 | m |
| Fiber Length:4700 MHz ? km 50μm MMF (OM4) |
| 0.5 |
- | 150 | m |
Performance Specifications – Electrical
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Data Rate, each Lane |
| - | 10.3125 | 10.5 | Gbps |
|
| Power Consumption (XLPPI) |
| - | - | 1.5 | W |
|
| Supply Current | ICC | - | 0.75 | 1.0 | A |
|
| Control I/O Voltage,High | VIH | 2.0 | - | VCC | V |
|
| Control I/O Voltage, Low | VIL | 0 | - | 0.7 | V |
|
| Inter-Channel Skew | TSK | - | - | 150 | ps |
|
| Transceiver Power On Initialization Time |
Tporinit |
- |
- |
2000 |
ms |
|
| RESETL Duration | - |
| 10 | - | us |
|
| RESETL De-assert time | - |
| - | 100 | ms |
|
| Power on time | - |
| - | 100 | ms |
|
| Transmitter (XLPPI) |
| |||||
| AC Common mode Voltage Tolerance (RMS) | - | 15 | - | - | mV |
|
| Tx Input Diff Voltage | VI | 90 | - | 1600 | mV |
|
| Tx Input Diff Impedance | ZIN | 80 | 100 | 120 |
| |
| Differential Input Return Loss |
| See IEEE 802.3ba 86A.4.11 |
| dB | 10MHz- 11.1GHz | |
| Eye MaskCoordinates {X1,X2 Y1,Y2} |
| 0.1, 0.31, 95, 350 |
| UI | mV | |
| Receiver (XLPPI) | ||||||
| AC Common mode Voltage Tolerance (RMS) | - | - | - | 7.5 | mV |
|
| Differential Output Return Loss | See IEEE 802.3ba 86A.4.2.1 |
| dB | 10MHz- 11.1GHz | ||
| Common-mode Output Return Loss | See IEEE 802.3ba 86A.4.2.2 |
| dB | 10MHz- 11.1GHz | ||
| Rx Output Diff Voltage | Vo | - | 600 | 800 | mV |
|
| Rx Output Rise and Fall Time | Tr/Tf |
|
| 35 | ps | 20% to 80% |
| Eye MaskCoordinates {X1,X2 Y1,Y2} |
| 0.29, 0.5,150, 425 |
| UI | mV | |
Performance Specifications – Optical
| Parameter | Symbol | Min | Typ. | Max | Unit | ||
| Center Wavelength | λt | 840 | 850 | 860 | nm | ||
| RMS Spectral Width | Pm | - | | 0.65 | nm | ||
| Average Optical Power, each Lane | Pavg | -7.6 | - | +1 | dBm | ||
| Optical Modulation Amplitude(OMA) | Poma | -6 | - | +3 | dBm | ||
| TDP,each Lane |
| - | - | 4 | dB | ||
| Extinction Ratio | ER | 3 | - | - | dB | ||
| Relative Intensity Noise | Rin | - | - | -128 | dB/Hz | ||
| Optical Return Loss Tolerance |
| - | - | 12 | dB | ||
| Transmitter Eye Mask Definition |
| Complied with IEEE802.3ba |
|
| |||
| Average Launch Power OFF Transmitter, each Lane | Poff |
- | - | -30 | dBm | ||
| Receiver | |||||||
| Center Wavelength | Λr | 830 | 850 | 860 | nm | ||
| Average Power at Receiver Input,each Lane |
| -9.5 |
- | 2.4 | dBm | ||
| Receiver Reflectance |
| - | - | -12 | dB | ||
| Los Assert | LosA | -30 | - | - | dBm | ||
| Los Dessert | LosD | - | - | -14 | dBm | ||
| Los Hysteresis | LosH | 0.5 | - | - | dB | ||
Order information
| Product Number | Data Rate(Gb/s) | Wavelength(nm) | Reach(m) | LD | Tx Power(dBm) | PD | Rx Sens(dBm) | Temperature(℃) |
| RQ-40G-SR4 | 40 | 850nm | OM3:100M OM4:150M | VCSEL | -7.6~1.0 | PIN | <-9.5 | 0~70 |
