環保在線>產品庫>廢氣處理/空氣凈化>廢氣處理設備組件>電氣裝置>>MPI-502多功能儀表電氣裝置

MPI-502多功能儀表電氣裝置

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱珠?？祵毴R儀表有限公司
品牌
型號MPI-502
所在地
廠商性質其他
更新時間2022/12/19 16:04:55
訪問次數709

產品標簽:

在線詢價收藏產品點擊查看電話

索取相關資料

公司介紹主營產品

康寶萊儀表是一家專注于化工、冶金、石化、油氣開采、水利電力、醫藥衛生、城市公共設施建設技術領域內的*的提供商，我們多年來一直積極支持中國的建設與發展。在“服務客戶***”這一原則指導下，我們致力于通過**產品、集成化系統和上等的專門知識，提高生產率、效率和靈活性。傳感器系統專業供貨商康寶萊儀表通過其傳感器系統為您提供完整而*的傳感器技術。我們的解決方案涵蓋廣泛的不同應用和要求。無論使用我們**產品中的哪一款，您都可以信賴康寶萊儀表作為自動化領域世界市場***所提供的深厚技術和專門知識。面向所有應用的豐富的傳感器產品康寶萊儀表憑借廣泛的行業經驗和雄厚的技術實力，已穩居自動化系統市場***地位?？祵毴R儀表憑借的能力，能為各個工業領域提供無比豐富、**的傳感器系統產品，可滿足各種行業應用的需求。我們的智能產品在精度和可靠性方面確立了，有助于提高您的競爭優勢。從現場儀表到系統解決方案康寶萊儀表提供豐富的過程和質量優化產品和系統。我們不僅提供***現場測量控制產品、還向化工、冶金、石化、油氣開采、水利電力、醫藥衛生、、城市公共設施建設等企業的自動化提供咨詢、設計、生產、安裝調試等的系統解決方案和強有力的技術支持?？祵毴R儀表提供的久經驗證的全新設備范圍極廣，涵蓋單個傳感器設備直到系統解決方案，可在各種應用環境下使用。康寶萊儀表擁有一批在工業測量和控制領域、信息技術領域工作多年的專業工程技術人員，在各種特定領域積累了豐富的應用經驗；有專門的事業部分別負責包括過程稱重、稱重配料系統、物液位測量、電量儀表、氣體分析、水質分析、流量測量等領域的產品和服務；我們相信品質源于專業，經過多年的不懈努力，獲得了廣大客戶的信任和同行的充分認可。

展開顯示更多內容

產品簡介在線詢價

MPI502 Short circuit loop parameters measurements: - measurements of short circuit loop impedance in networks with rated voltage: 220/380V, 230V/400V, 240/415V and frequency 45...65Hz, - measurements

MPI-502多功能儀表電氣裝置產品信息

Short circuit loop parameters measurements:
- measurements of short circuit loop impedance in networks with rated voltage: 220/380V, 230V/400V, 240/415V and frequency 45...65Hz,
- measurements of short circuit loop impedance with current 15mA without tripping the circuit breaker.
Testing the RCD breakers of AC, A types:
- testing of prompt, short-delay (general) and selective RCDs for the rated current values 10, 30, 100, 300, 500mA,
- IA measurement
- RE and UB measurement without tripping the circuit breaker,
- extended RCD test function AUTO, with measurement of ZL-PE with current 15mA - measurement of IA and tA during one RCD tripping.
Detection of the replacement L and N in the socket and automatic conversion in the meter.
Low voltage resistance measurements of protective circuits and junctions:
- measurement of resistance with 200 mA current
- calibration of test leads - possibility of using any length of test leads,
- low current resistance measurement with accoustic signalling
Rapid check for the correct connection of PE wire using touch electrode.
Measurement of mains voltage and frequency.
Power supply from LR6 batteries or NiMH accumulators (option).
The device meets the requirements of IEC 61557 standard.

MPI-502 Technical Specifications

The device meets the requirements of EMC standards EN 61326-1:2006 and EN 61326-2-2:2006.
Electric safety:
- type of insulation: double, according to EN 61010-1 and IEC 61557
- measurement category: IV 300V (III 600V) according to EN 61010-1
- protection class acc. to EN 60529: IP67

Other technical data:
- dimentions: 220 x 98 x 58mm
- weight: ~1kg
- Auto OFF time: 300, 600, 900 second
- number of measurements Z and RCD (for NiMH batteries): >5000 (2 per minute)

Short circuit loop impedance measurement Z_L-PE, Z_L-N, Z_L-L
Measurment using 7,6/13,3A current – Measurement range according to
IEC 61557: 0,13...1999Ω
(for 1,2m lead) and 0,19...1999Ω (for WS-01 and WS-04).

Display range	Resolution	Accuracy
0,00...19,99Ω	0,01Ω	±(5% m.v. + 3 dgt)
20,0...199,9Ω	0,1Ω
200...1999Ω	1Ω

• Nominal work voltage: Un_L-N/ Un_L-L: 220/380V, 230/400V, 240/415V,
• Voltage operating range: 100…264V (for Z_L-PE i Z_L-N) and 100…440V (for Z_L-L),
• Nominal network frequency fn: 50Hz, 60Hz,
• Max. test current: 23A (230V), 44A (440V),
• PE terminal connection corectores check with the help of touch electrode

Readings of fault loop impedance R and fault loop reactance X_L

Display range	Resolution	Accuracy
0,00...19,99Ω	0,01Ω	±(5% m.v. + 5 digits) of Z_S value
20,0...199,9Ω	0,1Ω	±(5% m.v. + 5 digits) of Z_S value

calculated and displayed for Z_S<200Ω.

Short circuit loop impedance Z_L-PE in mode RCD – without RCD tripping
Measurement using <15mA,current measurement range in accordance with IEC 61557: 0,51...1999,9Ω

Display range	Resolution	Accuracy
0,00...19,99Ω	0,01Ω	±(6% m.v. + 10 dgt)
20,0...199,9Ω	0,1Ω	±(6% m.v. + 5 dgt)
200...1999Ω	1Ω	±(6% m.v. + 5 dgt)

• test without tripping the RCD for I_Δn ≥ 30mA,
• nominal work voltage: Un: 220V, 230V, 240V,
• voltage operating range:180...270V,
• frequency operating range fn: 50Hz, 60Hz
• PE terminal connection correctness check with the help of touch electrode

Readings of fault loop impedance R and fault loop reactance X_L (without tripping the RCD)

Display range	Resolution	Accuracy
0,00...19,99Ω	0,01Ω	±(6% m.v + 10 dgt) of Z_S value
20,0...199,9Ω	0,1Ω	±(6% m.v + 5 dgt) of Z_S value

• calculated and displayed for Z_S<200Ω.

RCD parameters test (voltage range 180...270V):
RCD tripping test and measurment of tripping time t_A (for t_A function)

Breaker Type	Test Current Multiplier	Range	Resolution	Accuracy
Standard	0,5*I_Δn	0...300ms	1 ms	± (2% m.v. + 2 dgt)
	1*I_Δn	0...300ms
	2*I_Δn	0...150ms
	5*I_Δn	0...40ms
Selective	0,5*I_Δn	0...500ms
	1*I_Δn	0...500ms
	2*I_Δn	0...200ms
	5*I_Δn	0...150ms

• Precision of the differential current: 0,5*I_Δn:-8...0% for 1*I_Δn, 2*I_Δn, 5*I_Δn: 0...8%

Voltage measurement

Range	Range	Accuracy
0,0V...299,99V	0,1V	±(2% m.v. + 6 dgt)
300V...500V	1V	±(2% m.v + 2 dgt)

Frequency measurement

Range	Range	Accuracy
45,0V...65,0Hz	0,1Hz	±(1% m.v. + 1 dgt)

Touch voltage measurement referred to the rated residual current (U_B)

Range	Resolution	Test Current	Accuracy
0..9,9V	0,1V	0,4 x I_Δn	10% m.v. ± 5 dgt
10,0..99,9V	0,1V	0,4 x I_Δn	0...15% m.v.

Measurementof the RCD disconection current I_A for sine waveform testing current

Selected Current	Range	Resolution	Test Current	Accuracy
10mA	3,3...10,0mA	0,1mA	_{0,3 x IΔ}_{n...1,0 x IΔ}_n	±5%I_Δn
30mA	9,0...30,0mA	0,1mA
100mA	33...100mA	1mA
300mA	90...300mA
500mA	150...500mA

• It is posible to start the measurement from the positive or negative half of the forced leaking current

RCD I_A tripping current measurement for unidirectional pulsating residual current

Selected Current	Range	Resolution	Test Current	Accuracy
10mA	4...20,0mA	0,1mA	0,35xI_Δn..2,0xI_Δn	±10%I_Δn
30mA	12,0...42,0mA	0,1mA	0,35xI_Δn..1,4xI_Δn
100mA	40,0...140mA	1mA
300mA	120...420mA	1mA

• Measurement is possible for a positive or negative forced leakage current.

Low voltage test of the circuit and insulation continuity
Measurement range in accordance with IEC61557:0,12...400Ω
Test of PE wire continuity using a ±200mA current

Range	Resolution	Accuracy
0,00...19,99Ω	0,01Ω	±(2% m.v + 3 dgt)
20,0...199,9Ω	0,1Ω
200...400Ω	1Ω

• Voltage on open terminals: 4…9V,
• Test current at R<2Ω: min. 200mA,
• Autocalibration of test leads
• Measurements for both polarizations of the current

„m.v.” measured value.